ReFLEX: Length-Generalizable CSI Denoising for MIMO-OFDM via Relative-Frequency Bias

This letter studies CSI denoising for MIMO--OFDM with variable NR resource block (RB) allocations. ReFLEX is a length-generalizable Transformer whose frequency attention uses a relative-frequency position bias (RFPB) generated from subcarrier offsets. A single checkpoint handles unseen RB lengths and can be applied to sparse DM-RS observations in the tested RB5/RB10 PUSCH setup without retraining. In a 3GPP~TR~38.901 UMa NLOS channel, ReFLEX achieves about $-9.6$~dB NMSE on unseen RB lengths. In NR PUSCH/UL-SCH simulations, ReFLEX denoising followed by time-frequency interpolation reduces the 10\% BLER threshold by about 2--3~dB.

Tri-Domain Multiuser MIMO Precoding Optimization and Channel Estimation with Spatial-EM Reconfigurable Antenna

In this paper, we propose a tri-domain reconfigurable multiuser multiple-input multiple-output (MIMO) communication system that integrates the electromagnetic (EM) reconfigurable antenna (EMRA) with the spatially movable antenna (SMA), termed the spatial-EM reconfigurable antenna (SEMRA). The proposed system offers EM, spatial, and digital domain degrees of freedom (DoFs) for joint channel reconfiguration, yet introduces new challenges in channel estimation (CE) and precoding optimization. Specifically, for multiuser orthogonal frequency division multiplexing (OFDM) downlink, the precoding design is formulated as a tri-domain optimization problem over antenna positions, EM-domain radiation-pattern weights, and digital precoders. We first develop a zero-forcing (ZF)-based baseline algorithm to decouple the design of spatial reconfiguration, and then propose a weighted minimum mean square error (WMMSE)-based tri-domain joint optimization algorithm for further improving the spectral efficiency (SE). Furthermore, we propose a low-overhead movement-aided channel estimation scheme in which coordinated antenna repositioning across pilot slots synthesizes a denser virtual array, enabling more accurate angle-of-departure (AoD) estimation and EM-domain channel state information (eCSI) reconstruction under the same per-user pilot overhead as the EMRA baseline. The resulting parametric representation enables eCSI assembly at desired antenna positions without additional pilots. Simulation results show that the proposed CE scheme improves eCSI estimation accuracy and the proposed SEMRA achieves higher SE than the EMRA baseline under the same pilot overhead.

DJSCC-Enabled Multi-User Semantic CSI Feedback for Hybrid Beamforming in Dual-Polarized cmWave Massive MIMO

Driven by the ultra-high throughput requirements of 6G, wireless communications are migrating to centimeter wave (cmWave) bands to overcome the limitations of current spectral resources. Massive multiple-input multiple-output (MIMO) and orthogonal frequency division multiplexing (OFDM) systems aim to achieve high spectral efficiency in cmWave regimes but are often constrained by the heavy overhead of downlink channel state information (CSI) feedback. This paper proposes a deep learning scheme based on the multi-axis multi-layer perceptron for image processing (MAXIM) architecture for joint semantic CSI feedback and hybrid beamforming in multi-user cmWave MIMO-OFDM systems, which maximizes the downlink sum rate by end-to-end optimization. Specifically, distributed encoders at multiple user equipments (UEs) perform limited CSI feedback, while the decoder at the base station (BS) jointly designs the hybrid beamforming matrices without explicit CSI reconstruction. The uplink transmission is implemented via deep joint source-channel coding (DJSCC) to enhance CSI compression efficiency and noise robustness. Furthermore, considering the high correlation between vertical and horizontal polarization channels in dual-polarized massive MIMO systems, a cross-polarization interaction module is introduced at the UEs to exploit polarization correlations for joint CSI compression. Simulation results demonstrate that the proposed method improves the downlink sum rate under various signal-to-noise ratio (SNR) conditions with a limited number of feedback symbols, validating its robustness and superiority in multi-user dual-polarized cmWave MIMO-OFDM systems.

Beyond Importance Sampling: Rejection-Gated Policy Optimization

We propose a new perspective on policy optimization: rather than reweighting all samples by their importance ratios, an optimizer should select which samples are trustworthy enough to drive a policy update. Building on this view, we introduce Rejection-Gated Policy Optimization (RGPO), which replaces the importance sampling ratio r_theta = pi_theta / pi_old with a smooth, differentiable acceptance gate alpha_theta(s, a) = g(r_theta(s, a)) in the range [0, 1]. Unlike prior work that applies rejection sampling as a data-level heuristic before training, RGPO elevates rejection to an optimization principle: the gate participates directly in gradient computation and is implicitly updated alongside the policy. RGPO provides a unified framework: the policy gradients of TRPO, PPO, and REINFORCE all correspond to specific choices of the effective gradient weight w(r) = g'(r) * r. We prove that RGPO guarantees finite, bounded gradient variance even when importance sampling ratios are heavy-tailed (where IS variance diverges). We further show that RGPO incurs only a bounded, controllable bias and provides an approximate monotonic policy improvement guarantee analogous to TRPO. RGPO matches PPO in computational cost, requires no second-order optimization, and extends naturally to RLHF-style preference alignment. In online preference fine-tuning of Qwen2.5-1.5B-Instruct on Anthropic HH-RLHF (n = 3 seeds), RGPO uses a dual-ratio gate that anchors learning to both the previous policy and the reference model, achieving a Pareto-dominant outcome: the highest reward among online RL methods (+14.8% vs. PPO-RLHF) and the lowest KL divergence to the reference model (-16.0% vs. PPO-RLHF, -53.1% vs. GRPO).

Rydberg Atomic Receivers for Net-Zero 6G Wireless Communication and Sensing: Progress, Experiments, and Sustainable Prospects

Against the backdrop of the global drive to advance the green transformation of the information and communications technology (ICT) industry and leverage technological innovation to facilitate the achievement of Net-Zero carbon goals, research into Rydberg atomic receivers (RAREs) is gaining significant interest. RAREs leverage the electron transition phenomenon for signal reception, offering significant advantages over conventional radio frequency receivers in terms of miniaturized antenna design, high sensitivity, robust interference resistance, and compact form factors, which positions them as a competitive alternative for meeting zero-carbon communication demands. This article systematically elaborates on the basic principle, state-of-the-art progress, and novel experiments of RAREs in quantum wireless communication and sensing. In this first-of-its-kind work, we experimentally verify the RARE-based orthogonal frequency division multiplexing transmission and reveal the potential of deep learning design in optimizing quantum wireless systems. Finally, we delve into the prospect of integrating RARE with existing cutting-edge application scenarios, while mapping out critical pathways for developing Rydberg-based wireless systems.

A Joint Graph-Cut Channel Estimation Method for Multi-user Holographic MIMO

To address the challenges of high-dimensional channel estimation and underutilized spatial correlations among users in holographic MIMO (HMIMO) systems, this paper proposes a joint graph-cut algorithm for multi-user channel estimation in the wavenumber domain. The size of the conventional angular domain channel matrix increases with the number of antennas in densely-spaced HMIMO. Therefore, user channels are projected into the wavenumber domain via a Fourier harmonic transform, revealing their inherent clustered sparsity and exploiting common scatterer clusters among users. Subsequently, a joint graph-cut channel estimation (JGC-CE) algorithm based on multi-user common supports is designed. In each iteration, the algorithm first partitions user clusters to extract shared supports. Then for each user, it performs users' individual graph update and channel estimation to reconstruct the channel matrix. Simulation results demonstrate that the proposed method outperforms independent estimation schemes for individual users in accuracy while reducing pilot length.

From Specialist to Large Models: A Paradigm Evolution Towards Semantic-Aware MIMO

The sixth generation (6G) network is expected to deploy larger multiple-input multiple-output (MIMO) arrays to support massive connectivity, which will increase overhead and latency at the physical layer. Meanwhile, emerging 6G demands such as immersive communications and environmental sensing pose challenges to traditional signal processing. To address these issues, we propose the ``semantic-aware MIMO'' paradigm, which leverages specialist models and large models to perceive, utilize, and fuse the inherent semantics of channels and sources for improved performance. Moreover, for representative MIMO physical-layer tasks, e.g., random access activity detection, channel feedback, and precoding, we design specialist models that exploit channel and source semantics for better performance. Additionally, in view of the more diversified functions of 6G MIMO, we further explore large models as a scalable solution for multi-task semantic-aware MIMO and review recent advances along with their advantages and limitations. Finally, we discuss the challenges, insights, and prospects of the evolution of specialist models and large models empowered semantic-aware MIMO paradigms.

Transformer-based Hybrid Beamforming with Dynamic Subarray for Near-Space Airship-Borne Communications

This paper proposes a hybrid beamforming framework for massive multiple-input multiple-output (MIMO) in near-space airship-borne communications. To achieve high energy efficiency (EE) in energy-constraint airships, a dynamic subarray structure is introduced, where each radio frequency chain (RFC) is connected to a disjoint subset of the antennas according to channel state information (CSI). The proposed joint dynamic hybrid beamforming network (DyHBFNet) comprises three key components: 1) An analog beamforming network (ABFNet) that optimizes the analog beamforming matrices and provides auxiliary information for the antenna selection network (ASNet) design, 2) an ASNet that dynamically optimizes the connections between antennas and RFCs, and 3) a digital beamforming network (DBFNet) that optimizes digital beamforming matrices by employing a model-driven weighted minimum mean square error algorithm for improving beamforming performance and convergence speed. The proposed ABFNet, ASNet, and DBFNet are all designed based on advanced Transformer encoders. Simulation results demonstrate that the proposed framework significantly enhances spectral efficiency and EE compared to baseline schemes. Additionally, its robust performance under imperfect CSI makes it a scalable solution for practical implementations.

Movable Antenna for Integrating Near-field Channel Estimation and Localization

Movable antenna (MA) introduces a new degree of freedom for future wireless communication systems by enabling the adaptive adjustment of antenna positions. Its large-range movement renders wireless channels transmission into the near-field region, which brings new performance enhancement for integrated sensing and communication (ISAC). This paper proposes a novel multi-stage design framework for broadband near-field ISAC assisted by MA. The framework first divides the MA movement area into multiple subregions, and employs the Newtonized orthogonal matching pursuit algorithm (NOMP) to achieve high-precision angle estimation in each subregion. Subsequently, a method called near-field localization via subregion ray clustering (LSRC) is proposed for identifying the positions of scatterers. This method finds the coordinates of each scatterer by jointly processing the angle estimates across all subregions. Finally, according to the estimated locations of the scatterers, the near-field channel estimation (CE) is refined for improving communication performance. Simulation results demonstrate that the proposed scheme can significantly enhance MA sensing accuracy and CE, providing an efficient solution for MA-aided near-field ISAC.

Ultra-Massive MIMO with Orthogonal Chirp Division Multiplexing for Near-Field Sensing and Communication Integration

This paper integrates the emerging ultra-massive multiple-input multiple-output (UM-MIMO) technique with orthogonal chirp division multiplexing (OCDM) waveform to tackle the challenging near-field integrated sensing and communication (ISAC) problem. Specifically, we conceive a comprehensive ISAC architecture, where an UM-MIMO base station adopts OCDM waveform for communications and a co-located sensing receiver adopts the frequency-modulated continuous wave (FMCW) detection principle to simplify the associated hardware. For sensing tasks, several OCDM subcarriers, namely, dedicated sensing subcarriers (DSSs), are each transmitted through a dedicated sensing antenna (DSA) within the transmit antenna array. By judiciously designing the DSS selection scheme and optimizing receiver parameters, the FMCW-based sensing receiver can decouple the echo signals from different DSAs with significantly reduced hardware complexity. This setup enables the estimation of ranges and velocities of near-field targets in an antenna-pairwise manner. Moreover, by leveraging the spatial diversity of UM-MIMO, we introduce the concept of virtual bistatic sensing (VIBS), which incorporates the estimates from multiple antenna pairs to achieve high-accuracy target positioning and three-dimensional velocity measurement. The VIBS paradigm is immune to hostile channel environments characterized by spatial non-stationarity and uncorrelated multipath environment. Furthermore, the channel estimation of UM-MIMO OCDM systems enhanced by the sensing results is investigated. Simulation results demonstrate that the proposed ISAC scheme enhances sensing accuracy, and also benefits communication performance.